C Frame Vertical Injection Molding Machine

Main Standard :
MODEL YHS-35 YHS-55 YHS-80 YHS-100
INJECTION UNIT
Screw Diameter mm 26 /32 32/36/40 38/45/50 45/50/55
Injection Pressure kgf/cm2 2071 /1367 1807/1427/1156 1628/1167/950 1588/1287/1063
Injection Capacity  cm3 64/ 96 104/132/163 181/254/314 278/343/415
Injection Weight(P.S) gr 57 /87 94/119146 163/228/282 250/309/374
oz 2 3 3.3/4.1/5.1 5.7/8/9.6 8.8/10./13.1
Injection Rate cc/s 44 /67 63/80/98 90/127/157 122/154/182
Screw Speed r.p.m 0 ~ 180 0 ~ 180 0 ~ 180 0 ~ 160
Screw Stroke mm 120 130 160 175
Nozzle Stroke mm 130 150 200 250
Nozzle Contact Force tf 3.5 3.5 7.2 7.2
CLAMPING UNIT
Clamping System --  Hydraulic
Clamping Force tf 35 55 80 100
Clamping Stroke mm 200 200 300 300
Max. Mould Space mm 375 375 480 500
Min. Mould Space mm 175 175 180 200
Overall Size of Platens(HxV) mm 420x240 480x280 580x380 650x420
Hydraulic Ejector Force tf 1.7 1.7 2.7 2.7
Ejector Stroke mm 40 40 40 40
Nozzle Center Height mm 140+/- 25 140+/- 25 150+/- 25 150+/- 25
Min. Distance From Center Of Nozzle To Mold Center mm 75 75 125 125
ELECTRICAL EQUIPMENT & GENERAL
Drive Motor kw 5.5(7.5HP) 7.5(10HP) 11.1(15HP) 14.9(20HP)
Heater kw 4.1 5.1 7.6 9.5
Dimension of Machine(LxWxH) m 2.5x1.4x2.4 2.6x1.4x2.45 2.9x1.5x2.6 3.0x2.0x3.0
Weight of Machine t 3.5 4.5 6.7 8.1
Shipping Size(LxWxH) m 2.7x1.8x2.6 2.8x1.8x2.7 3.1x1.9x2.8 3.2x2.4x3.2
Shipping Weight t 4.2 5.2 7.6 9.1
Oil Tank Capacity l 160 220 260 340
Cooling Water l/hr 600 ~ 800 800 ~ 800 800 ~1000 1000 ~ 1200
Moldboard Dimensional :

YHS Series - YHS-35 -  Moldboard Dimensional

@