Vertical Plastic Injection Molding Machines

Main Standard :
MODEL YH-25V YH-35V YH-45V YH-55V YH-70V YH-85V @

YH-100V

@

YH-150V
INJECTION UNIT
Screw Diameter mm 22/26 26/32 28/36 30/38 32/40 36/42 40/46 46/52
Injection Pressure kgf/cm2 2089/1496    2071/1367 2321/1404 2057/1282 2180/1395 2176/1599   2104/1591      1667/1304 
Injection Capacity cm3 36/50 64/96 80/132 92/147 113/176 158/215 214/282 316/403
Injection Weight(P.S) gram 32/45 57/87 72/119 83/133 101/158 141/194 192/254 284/363
Injection Rate cc/s 33/46 44/67 47/78 55/89 60/94 61/83 78/103 109/139
Screw Speed r.p.m 0 ~ 150 0~180 0~180 0~180 0~180 0~180 0~180 0~150
Screw Stroke mm 90 120 130 130 140 155 170 190
Nozzle stroke mm 150 150 200 200 200 200 200 200
Nozzle Force tf 2.4 2.4 3.5 3.5 3.5 3.5 3.5 3.5
CLAMPING UNIT
Clamping Force tf 25 35 45 55 70 85 100 150
Clamping Stroke mm 215 215 215 200 200 200 250 250
Max. Mould Space mm 360 360 395 380 380 380 500 550
Min. Mould Height mm 145 145 180 180 180 180 250 300
Mold Platen Size mm 490x290 600x350 600x400 650x400 650x450 760x560 800x600 860x630
Space between Tie Bars mm 350x150 450x190 440x240 490x240 490x290 520x320 560x360 600x360
Hydraulic Ejector Force tf 1.7 1.7 1.7 1.7 1.7 2.7 2.7 2.7
Ejector Stroke mm 35 35 35 35 35 35 50 60
ELECTRICAL EQUIPMENT & GENERAL
Drive Motor kw 3.7(5HP)  5.5(7.5HP) 7.5(10HP) 7.5(10HP) 11.1(15HP) 11.1(15HP) 14.9(20HP) 18.6(25HP)
Heater kw 3 4.1 4.9 4.9 5.6 6.7 8.5 10
Max. Hydraulic Pressure kgf/cm2 140 @ @
Oil Tank Capacity l 130 160 180 220 260 260 340 400
Dimension of Machine(LxWxH) m 1.3 x 1. x 2.8 1.5x1.2x3.1 1.6x1.3x3.2 1.6x1.3x3.2 1.8x1.4x3.4 2.2x1.5x4.1 2.3x1.6x4.2 2.4x1.7x4.3
Weight of Machine ton 1.15 1.8 2.4 2.8 3.8 4.3 5 7.8
Figures shown herein are subject to change without notice.

Screw and clamping force can be design as customer's request.